2.
In the Configuration pane, expand
Devices and Interfaces
to see the list of installed
devices. Installed devices appear under the name of their associated chassis.
3.
Expand your
Chassis
tree item. MAX lists all devices installed in the chassis. Your
default device names may vary.
Note
If you do not see your module listed, press <F5> to refresh the list of
installed modules. If the module is still not listed, power off the system, ensure
the module is correctly installed, and restart.
4.
Record the device identifier MAX assigns to the hardware. Use this identifier when
programming the PXIe-7902.
5.
The MAX self-test performs a basic verification of hardware resources. To self-test a
module in MAX, right click the module and select
Self-Test
.
If any module fails the self-test, refer to the
Troubleshooting
section of this document.
Accessing Sample Projects
NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments includes sample
projects to help you get started designing for the PXIe-7902.
1.
Launch LabVIEW.
2.
Select
Create Project
.
3.
In the
Create Project
dialog box, select
High-Speed Serial
and select a sample project
for your device.
4.
Click
Next
.
5.
Configure the
Project Name
,
Project Root
, and
File Name
Prefix (Optional)
fields.
6.
Click
Finish
.
PXIe-7902 Front Panels
The following figure shows the available signals on the PXIe-7902.
6
|
ni.com
|
PXIe-7902 Getting Started Guide
