manualshive.com logo in svg

National Instruments PXIe-5696, Getting Started Manual, Page: 5 / 22

Share
Download
National Instruments PXIe-5696 Getting Started Manual Download Page 5

If the installation window does not appear, navigate to the drive, double-click it, and
double-click 

autorun.exe

.

3.

Follow the instructions in the installation prompts to install the NI-RFSG driver software.

Note

 

Windows users may see access and security messages during

installation. Accept the prompts to complete the installation.

4.

When the installer completes, restart your system.

Installing the NI 5696

Caution

 

To prevent damage to the device caused by ESD or contamination, handle

the device using the edges or the metal bracket.

You must install NI-RFSG before installing the hardware.

Before you install the hardware, refer to the guidelines in the 

Maintain Forced-Air Cooling

Note to Users

 included with the module to ensure that the chassis can cool the device

effectively.

To use the included cables, you must install the NI 5696 amplitude extender module in the slot
immediately to the right of the NI 5654 RF signal generator module.
1.

Ensure the AC power source is connected to the chassis before installing the modules.

The AC power cord grounds the chassis and protects it from electrical damage while you
install the modules.

2.

Power off the chassis.

3.

Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.

4.

Remove the black plastic connectors from all the captive screws on the module front
panel.

5.

Identify a supported slot in the chassis. The following figure shows the symbols that
indicate the slot types.

Figure 2.

 Chassis Compatibility Symbols

NI PXIe-1062Q

1

2

3

4

5

1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot

NI 5696 modules can be placed in PXI Express peripheral slots, PXI Express hybrid
peripheral slots, or PXI Express system timing slots.

NI PXIe-5696 Getting Started Guide

  | 

© National Instruments

  | 

5

Summary of Contents for PXIe-5696























Reviews:

No comments