National Instruments PXIe-5696 Getting Started Manual Download Page 1 | Manualshive

Page: 1 / 22

National Instruments PXIe-5696 Getting Started Manual Download Page 1

GETTING STARTED GUIDE

NI PXIe-5696

250 kHz to 20 GHz Amplitude Extender

Note

Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI PXIe-5696 (NI 5696) as a
20 GHz amplitude extender (AE) module to the NI PXIe-5654 (NI 5654) RF signal generator.
The NI 5696 ships with the NI-RFSG instrument driver, which you use to program the device.

Note

The NI 5696 AE module is supported for use with only the NI 5654 RF

signal generator.

To access NI 5696 documentation, navigate to

Start

»

All Programs

»

National Instruments

»

NI-RFSG

»

Documentation

.

The specifications document for your device is installed with the driver software. Refer to

ni.com/manuals

for the most recent specifications for your device.

Caution

The protection provided by this product may be impaired if it is used in a

manner not described in this document.

Hot Surface

If the NI 5696 has been in use, it may exceed safe handling

temperatures and cause burns. Allow the NI 5696 to cool before removing it from
the chassis.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents................................................................................................ 3

Preparing the Environment....................................................................................................... 4
Installing the Software.............................................................................................................. 4
Installing the NI 5696............................................................................................................... 5

Direct Connections to the NI 5696................................................................................... 6
Connecting to the NI 5654................................................................................................ 7
NI 5696 Amplitude Extender Module.............................................................................. 9

Configuring the NI 5696 in MAX...........................................................................................11

1
2
3
...
»

Summary of Contents for PXIe-5696























Reviews:

No comments