GETTING STARTED GUIDE
NI PXIe-5663E
6.6 GHz RF Vector Signal Analyzer with Digital Downconversion
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the NI 5663E. The NI 5663E is a
modular 6.6 GHz RF vector signal analyzer (VSA) with digital downconversion. The
NI 5663E ships with the NI-RFSA instrument driver, which you use to program the device.
You can also use NI-RFmx, available at
The NI 5663E comprises the following devices:
•
NI PXIe-5601 (NI 5601) RF downconverter module
•
NI PXIe-5622 (NI 5622) IF digitizer module
•
NI PXIe-5652 (NI 5652) LO source module
Caution
The protection provided by this product may be impaired if it is used in a
manner not described in this document.
Hot Surface
If the NI 5663E has been in use, it may exceed safe handling
temperatures and cause burns. Allow the NI 5663E to cool before removing it from
the chassis.
Contents
Electromagnetic Compatibility Guidelines...............................................................................2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Software Options...............................................................................................................5
Installing the Software...................................................................................................... 6
