background image

NI 5646R First Measurement Options

You can verify proper installation and configuration of your device using the NI-RFSG Soft
Front Panel and NI-RFSA Soft Front Panel. Additionally, if you installed the instrument
design libraries, you can make a measurement using a LabVIEW sample project.

Making a Measurement with Soft Front Panels

Use the NI-RFSG Soft Front Panel and NI-RFSA Soft Front Panel to verify proper installation
and configuration of the NI 5646R hardware.
1.

Connect the RF IN port to the RF OUT port using an SMA (m)-to-SMA (m) cable.

Caution

 

Do not disconnect the cable that connects CAL IN to CAL OUT.

Removing the cable from or tampering with the CAL IN or CAL OUT front
panel connectors voids the product calibration and specifications are no longer
warranted.

2.

Select 

Start

»

All Programs

»

National Instruments

»

NI-RFSG

»

NI-RFSG Soft Front

Panel

 to launch the NI-RFSG Soft Front Panel.

3.

Select the device identifier assigned to the NI 5646R in MAX in the 

Device

 drop-down

menu.

4.

Click the 

RF On/Off

 button to generate a 1 GHz continuous wave (CW) tone RF signal

at the RF output terminal of your device.

5.

Select 

Start

»

All Programs

»

National Instruments

»

NI-RFSA

»

NI-RFSA Soft Front

Panel

 to launch the NI-RFSA Soft Front Panel.

6.

Select the device identifier assigned to the NI 5646R in MAX in the 

Device

 drop-down

menu.

7.

Verify that the NI-RFSA Soft Front Panel is receiving the CW tone.

8.

Close the NI-RFSA Soft Front Panel and NI-RFSG Soft Front Panel.

Related Information

Refer to the NI-RFSG Soft Front Panel Help for more information about using the NI-RFSG
Soft Front Panel.
Refer to the NI-RFSA Soft Front Panel Help for more information about using the NI-RFSA
Soft Front Panel.

Making a Measurement with a Sample Project

This measurement requires installation of the instrument design libraries.
1.

Launch LabVIEW.

2.

Select 

File

»

Create Project

.

3.

On the left side of the 

Create Project

 window, select 

Vector Signal Transceiver (VST)

.

4.

On the right side of the 

Create Project

 window, select the 

Simple VSA and VSG

sample project for your device and click 

Next

.

5.

Specify a name and location for the project in the 

Create Project

 window and click 

OK

.

LabVIEW creates, configures, and opens a new Simple VSA and VSG project.

20

  | 

ni.com

  | 

NI PXIe-5646R Getting Started Guide

Summary of Contents for PXIe-5646R

























Reviews: