National Instruments PXIe-5630, Getting Started Manual

Page: 4 / 18

Table 1.
NI 5630 Accessories
Accessory Part Number
Manual VNA Calibration Kit, K-Type 781587-01
Manual VNA Calibration Kit, N-Type 781588-01
Automatic VNA Calibration Kit, K-Type, Male-Female, 70 KHz to 9 GHz 782364-01
Phase-Equal Precision Adapter Kit, K-Type 781595-01
Phase-Equal Precision Adapter Kit, N-Type 781596-01
Precision Coaxial Cable, 0.6 m, K-Type, Male-Male 781607-01
Precision Coaxial Cable, 0.6 m, K-Type, Male-Female 781608-01
Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Male 781609-01
Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Female 781610-01
Calibrated 5/16" Torque Wrench, 8 in-lbs (0.9 Nm) 781615-01
Preparing the Environment
Ensure that the environment you are using the NI 5630 in meets the following specifications.
............................................................................ Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2) 0 °C to 55 °C
............................................................................ Operating relative humidity
(IEC-60068-2-56) 10% to 90%, noncondensing
............................................................................ Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient
temperature)
............................................................................ Pollution Degree 2
Indoor use only.
Caution
Clean the hardware with a soft, nonmetallic brush. Make sure that the
hardware is completely dry and free from contaminants before returning it to
service.
Note Refer to the NI PXIe-5630 Specifications at ni.com/manuals for complete
specifications.
4
|
ni.com
|
NI PXIe-5630 Getting Started Guide