GETTING STARTED GUIDE
PXIe-5172
100 MHz, 250 MS/s, 14-Bit PXI Express Oscilloscope
Note
Before you begin, complete the installation and configuration procedures in
your chassis and controller documentation.
This document explains how to install and start using the PXIe-5172.
Safety Guidelines
Notice
—Take precautions to avoid data loss, loss of signal integrity, degradation of
performance, or damage to the model.
Caution
—Take precautions to avoid injury. Consult the model documentation for
cautionary statements when you see this icon printed on the model. Cautionary
statements are localized into French for compliance with Canadian requirements.
Shock Warning
—Take precautions to avoid electrical shock.
Hot Surface
—Take precautions to avoid physical burns.
Caution
Observe all instructions and cautions in the user documentation. Using
the model in a manner not specified can damage the model and compromise the
built-in safety protection. Return damaged models to NI for repair.
Attention
Suivez toutes les instructions et respectez toutes les mises en garde de la
documentation utilisateur. L'utilisation d'un modèle de toute autre façon que celle
spécifiée risque de l'endommager et de compromettre la protection de sécurité
intégrée. Renvoyez les modèles endommagés à NI pour réparation.
EMC Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
