background image

ni.com/labview/fpga

Visit this web page for information about LabVIEW FPGA
Module.

The Benefits of
Templates and Sample
Projects

Visit 

ni.com/info

 and enter the Info Code 

exqazs

 for resources

on LabVIEW sample projects.

ni.com/software-
designed-instruments

Visit this web page for resources on designing application-specific
instrumentation for the PXIe-5170/5171, including programming
and FPGA customization information, examples, and IP.

Sample Projects

Use as a starting point for application development using
instrument design libraries. Available in LabVIEW under 

Create

Project

»

Sample Projects

»

Oscilloscopes

.

NI Reconfigurable
Oscilloscopes Help

Use this help file, located at 

Start

»

All Programs

»

National

Instruments

»

Reconfigurable Oscilloscopes

, to learn how to

operate the PXIe-5170/5171 using instrument design libraries.
This help file also includes device information and programming
information.

NI High-Speed
Digitizers Help

Use this help file, located at 

Start

»

All Programs

»

National

Instruments

»

NI-SCOPE

, to learn how to operate the

PXIe-5170/5171 using the NI-SCOPE device driver. This help file
also includes device information and programming information.

Note

 

Help documentation installs with both software options or can be

downloaded from 

ni.com/manuals

.

The most recent versions of product documentation are available at 

ni.com/manuals

.

Worldwide Support and Services

The NI website is your complete resource for technical support. At 

ni.com/support

, you have

access to everything from troubleshooting and application development self-help resources to
email and phone assistance from NI Application Engineers.

Visit 

ni.com/services

 for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit 

ni.com/register

 to register your NI product. Product registration facilitates technical

support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the
European Communities using the manufacturer’s declaration of conformity. This system
affords the user protection for electromagnetic compatibility (EMC) and product safety. You

PXIe-5170/5171 Getting Started Guide

  | 

© National Instruments

  | 

17

Summary of Contents for PXIe-5170



















Reviews: