CALIBRATION PROCEDURE
NI PXIe-4340
4 Ch, 24-bit, 25.6 kS/s Simultaneous AC LVDT Input Module
This document contains the verification procedure for the National Instruments PXIe-4340
module.
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 2
PXIe-4340 Verification ............................................................................................................ 3
Test Conditions................................................................................................................. 5
Initial Setup....................................................................................................................... 6
Accuracy Verification....................................................................................................... 6
Excitation Accuracy ................................................................................................. 6
Ratiometric Accuracy ............................................................................................... 9
Software
Calibrating the NI PXIe-4340 requires the installation of NI-DAQmx on the calibration system.
Driver support for calibrating the PXIe-4340 was first available in NI-DAQmx 16.1. For the list
of devices supported by a specific release, refer to the
NI-DAQmx Readme
, available on the
version-specific download page or installation media.
You can download NI-DAQmx from
. NI-DAQmx supports LabVIEW,
LabWindows
™
/CVI
™
, C/C++, C#, and Visual Basic .NET. When you install NI-DAQmx, you
only need to install support for the application software that you intend to use.
ni.com/manuals
Deutsch
Français
