NI PXIe-4339 and RM-4339 User Guide and Terminal Block Specifications
|
© National Instruments
|
5
3.
Identify a supported PXI Express slot in the chassis. SC Express devices can be placed only
in PXI Express Peripheral slots, PXI Express Hybrid Peripheral slots, and PXI Express
System Timing slots. Refer to the chassis documentation for details.
Figure 1.
Symbols for PXI Express/PXI Express Hybrid/PXI Slots
4.
Remove the filler panel, and touch any metal part of the chassis to discharge static
electricity.
5.
Place the module edges into the module guides at the top and bottom of the slot.
Caution
When installing the module, make sure both edges are positioned inside
the guides and that the module components do not come into contact with adjacent
modules.
6.
Slide the module along the guides until it reaches the rear connector then seat the module
by pushing the front panel until it is flush with the front panel of the chassis.
7.
Secure the module to the chassis using the front-panel captive screws, shown in Figure 2.
Tighten the screws to 0.31 N · m (2.7 lb · in.).
Figure 2.
Installing NI PXIe-4339 Modules
1
PXI Express System Controller Slot
2
PXI Peripheral Slot
3
PXI Express Hybrid Peripheral Slot
4
PXI Express System Timing Slot
1
Captive Screws
NI PXIe-1062Q
1
2
3
4
NI
PX
Ie-10
62Q
CO
OLING
CL
EARA
NCE
AND
FAN
FILT
ER
MA
INTE
NA
NCE
RE
QUI
RE
D.
S
EE MA
NU
AL.
1