3. Download the latest version of NI-DCPower by clicking
Download
and then
running the executable (.exe) file.
Driver support for the PXIe-4163 was first available in NI-DCPower 17.6.
4. Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
5. When the installer completes, select
Restart
in the dialog box that prompts
you to restart, shut down, or restart later.
Installing the PXIe-4163
Notice
To prevent damage to the PXIe-4163 caused by ESD or
contamination, handle the module using the edges or the metal bracket.
1. Ensure the AC power source is connected to the chassis before installing the
PXIe-4163.
The AC power cord grounds the chassis and protects it from electrical damage
while you install the PXIe-4163.
2. Power off the chassis.
3. Inspect the slot pins on the chassis backplane for any bends or damage prior
to installation. Do not install a module if the backplane is damaged.
4. Position the chassis so that inlet and outlet vents are not obstructed.
For more information about optimal chassis positioning, refer to the chassis
documentation.
5. Remove the black plastic covers from all the captive screws on the module
front panel.
6. Identify a supported slot in the chassis. The following figure shows the
symbols that indicate the slot types.
ni.com
6
PXIe-4163
Summary of Contents for PXIe-4163
Page 1: ...PXIe 4163 2022 06 30...
