Humidity
Operating
10% to 90%, noncondensing
Storage
5% to 95%, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m (800 mbar) (at 25 °C ambient temperature)
Notice
This model is intended for use in indoor applications only.
Related Information
Refer to the PXIe-4162 Specifications at ni.com for complete specifications.
Installing the Software
You must be an Administrator to install NI software on your computer.
1.
Install an ADE, such as LabVIEW or LabWindows
™
/CVI
™
.
2.
Visit
and search for
NI-DCPower
.
3.
Download the latest version of NI-DCPower by clicking
Download
and then running the
executable (
.exe
) file.
Driver support for the PXIe-4162 was first available in NI-DCPower 17.6.
4.
Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
5.
When the installer completes, select
Restart
in the dialog box that prompts you to restart,
shut down, or restart later.
Installing the PXIe-4162
Notice
To prevent damage to the PXIe-4162 caused by ESD or contamination,
handle the module using the edges or the metal bracket.
The PXIe-4162 is a single-slot module with one backplane connector. The module may be
installed into any PXI Express-compatible slot.
1.
Ensure the AC power source is connected to the chassis before installing the PXIe-4162.
The AC power cord grounds the chassis and protects it from electrical damage while you
install the PXIe-4162.
2.
Power off the chassis.
3.
Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.
4
|
ni.com
|
PXIe-4162 Getting Started Guide
