Chapter 2
Hardware and Software Installation
NI CardBus-8310-to-PXI Expansion User Manual
2-6
ni.com
1.
Make sure your CAT5-e cables are connected correctly, then turn on
the PXI chassis, and plug the NI CardBus-8310 card into the laptop.
Power up the host computer.
2.
Both LEDs should be lit on the NI PXI-8310. Flashing LEDs indicate
that the wires are reversed. If the LEDs are flashing, switch the wires
and begin again at step 1.
3.
The dialog box shown in Figure 2-4 will appear the first time you boot
your computer with the PXI chassis connected.
Figure 2-4.
Found New Hardware Wizard Dialog Box (Windows 2000/XP SP2 Only)
4.
Choose
No
and click
Next
.
Summary of Contents for PXI-8310
Page 1: ...PXI 8310...