©
National Instruments Corporation
5
Using the PXI-8150B/8170 Series in a PXI-1020 Chassis
Step 2. BIOS Setup for LCD Support
1.
Insert your controller into Slot 1 of your PXI-1020 chassis and connect
an external monitor to the VGA port.
2.
Enter into the CMOS Setup Utility by turning on your PXI system and
pressing the <Delete> key during boot-up.
3.
From the main CMOS Setup Utility screen, select Standard CMOS
Setup using the arrow keys and then press the <Enter> key.
4.
Select one of the following options from the LCD & CRT menu item:
•
CRT—Just prior to the OS loading, only the CRT Display will be
enabled.
•
LCD—Just prior to the OS loading, only the LCD Display will be
enabled.
•
Both—Both the CRT and LCD Displays are always enabled.
•
Auto—If a CRT is connected to the controller at boot, only the
CRT is enabled. If a CRT is not connected at boot, only the LCD
is enabled.
Note
During the initial boot process, both the LCD and CRT displays are enabled.
Summary of Contents for PXI-8150B
Page 6: ......
