National Instruments PXI-6289, User Manual

Page: 245 / 298

B-20
|
ni.com
Appendix B Timing Diagrams
Analog Output Timing Diagrams
The analog output timing can be broken into the following three sections:
•
Input Timing
—The timing for external signals to enter the M Series device and be available
on the internal signal buses.
•
Internal Analog Output Timing
—The timing specifications of the analog output unit itself,
to and from internal signals.
•
Output Timing
—The timing of exported signals going to the M Series device external
terminals.
Figure B-22 gives an overview of analog output timing.
Figure B-22. M Series Analog Output Timing
The following signals are used in Figure B-22 and in the following sections:
•
Sample Clock
—This signal multiplied by the digital to analog conversions. This signal is
routed to the DAC, and in every pulse, the DAC will perform a data conversion. This signal
can come directly from an external signal or can be the result of dividing down the Sample
Clock Timebase using the UI counter.
•
Sample Clock Timebase
—This signal can be used to generate the Sample Clock. This
signal acts as the clock for the UI counter, and a Sample Clock can be generated every
N periods of the Sample Clock Timebase by programming the UI counter accordingly. This
signal can come from an internal source (such as the board oscillator) or an external source.
•
Sync Sample Clock Timebase
—The Sync Sample Clock Timebase is a signal that is
generated internally and is related to the Sample Clock Timebase. How it is generated and
S TAR_TRIG,
RT S I, or
PFI
S TAR_TRIG_i,
RT S I_i, or
PFI_i
Intern a l
S o u rce s
Sa mple
Clock
Time bas e
S elected P aus e
S elected
S t a rt
Trigger
Other
Intern a l
S o u rce s
PFI
RT S I
P aus e Trigger
S t a rt Trigger
Sa mple Clock
AO Timer