Quick Start Guide
Phase Matrix PXI-1440 IF Downconverter Module
23
Soft Front Panel
Control Tab
Figure 14
Control Tab
Serial Number, Soft Front Panel, Last Cal Date, and
FPGA Date Code
shown in the top-right corner of the Soft Front
Panel is information about the PXI module being controlled with this
Soft Front Panel. This information cannot be changed through the
Soft Front Panel.
Stop Button
This button is used to stop the Soft Front Panel from
reading and writing to the PXI module; it halts the program and is the
preferred way to exit the program.
Select Input Path
These selection buttons are used to select
between the IF A IN or IF B IN as the IF path.
•
When IF A IN is selected, the IF input signal that is applied to the
IF A IN connector is used.
•
When IF B IN is selected, the IF input signal that is applied to the
IF B IN connector is used.