Appendix D
Troubleshooting and Common Questions
PCMCIA Serial for Windows 98/95
D-6
©
National Instruments Corporation
Selecting Conflict-Free Resources
section earlier in
this appendix.
How do I change the resources assigned to PCMCIA two-port or
four-port serial cards?
Because the two-port PCMCIA cards are single physical devices that
support multiple ports, they are registered as “multi-function adapters” in
the Device Manager. Each port is a child device listed under
Ports (COM
& LPT)
. Windows 98/95 does not allow the resources of the multi-function
child devices to be changed directly.
To change the resources of ports on two-port PCMCIA cards from within
the Device Manager, you must open the
Multi-function adapters
class and
double-click on the
Multi-function Parent
item that corresponds to your
National Instruments serial interface. Use the
Resources
page to change
the resources. Any resource changes are automatically reflected to the child
devices. Figure D-2 shows the
Multi-function adapters
class in the
Device Manager.
Figure D-2.
Multi-Function Adapter Class in the Device Manager
Summary of Contents for PCMCIA Serias
Page 1: ...PCMCIA 485 2...
