NI-FBUS Installation Guide for Windows
6
ni.com
Figure 4.
Inserting the USB-8486
To install the USB-8486, complete the following steps.
1.
Power on the computer and allow the operating system to boot.
2.
Insert the USB-8486 into a free USB port, as shown in Figure 3 and
Figure 4.
3.
Connect the USB-8486 to the Fieldbus network. Refer to the
NI-FBUS
Hardware and Software User Manual
for more information about the
connectors.
4.
Launch the Interface Configuration Utility.
5.
Right-click the USB-8486 to enable if it is disabled.
6.
Close the Interface Configuration Utility and start the NI-FBUS
Communications Manager or NI-FBUS Configurator.
1
Port
a
ble Comp
u
ter
2
U
S
B Port
3
U
S
B-8486
4
DB-9 Connector
1
2
3
4
Summary of Contents for PCMCIA-FBUS/2
Page 1: ...PCMCIA FBUS 2...
