background image

Glossary

©

 National Instruments Corporation

G-3

NI PXI/PCI-1428 User Manual

P

PCI

Peripheral Component Interconnect. A high-performance expansion bus 
architecture originally developed by Intel to replace ISA and EISA. PCI 
offers a theoretical maximum transfer rate of 133 Mbytes/s.

pixel

Picture element. The smallest division that makes up the video scan line; 
for display on a computer monitor, a pixel’s optimum dimension is square 
(aspect ratio of 1:1, or the width equal to the height).

pixel clock

Divides the incoming horizontal video line into pixels.

R

RAM

Random-access memory.

real time

A property of an event or system in which data is processed as it is acquired 
instead of being accumulated and processed at a later time.

resolution

The smallest signal increment that can be detected by a measurement 
system. Resolution can be expressed in bits, in proportions, or in percent 
of full scale. For example, a system has 12-bit resolution, one part in 4,096 
resolution, and 0.0244 percent of full scale.

RGB

Color encoding scheme using red, green, and blue (RGB) color information 
where each pixel in the color image is encoded using 32 bits: eight bits for 
red, eight bits for green, eight bits for blue, and eight bits for the alpha value 
(unused).

ROI

Region of interest. A hardware-programmable rectangular portion of the 
acquisition window.

RTSI bus

Real-Time System Integration Bus. The National Instruments timing bus 
that connects image acquisition and DAQ devices directly, by means of 
connectors on the devices, for precise synchronization of functions.

S

scatter-gather DMA

A type of DMA that allows the DMA controller to reconfigure on-the-fly.

SDRAM

Synchronous dynamic RAM.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for NI Vision PXI-1428






































Reviews: