NI TB-2630 Installation Instructions
12
ni.com
Figure 4.
0.100 in. Pitch Cable Assembly
The TB-2630 includes eight 2 × 9 0.100 in. pitch ribbon cable connectors.
Refer to Table 4 for additional connectors that you can use with the
TB-2630.
You can use any 0.050 in. pitch ribbon cable with the TB-2630. To use
a ribbon cable with more than 18 conductors, remove the unwanted
conductors before using. Refer to Table 4 for more information about
the cable connector assembly.
Compliance and Certifications
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 3111-1, UL 61010B-1
•
CAN/CSA C22.2 No. 1010.1
Table 4.
Third-Party Accessories for the TB-2630
Accessory
Manufacturer
Part Number
2 × 9 0.100 in. Pitch Ribbon Cable Connector
Samtec
IDD-09-HG
0.100 in. Pitch Cable Connector Assembly (0.100 in.
Pitch Connector and 0.050 in. Pitch Ribbon Cable)
Samtec
IDSD-09 Series
0.100 in.
0.050 in.
