National Instruments NI sbRIO-9627, Specification

Page: 9 / 14

Maximum update rate
6
336 kS/s
Range ±10 V
Overrange operating voltage
Minimum 10.3 V
Typical 10.6 V
Maximum 10.9 V
Output impedance 0.4 Ω typical
Current drive ±3 mA/channel maximum
Protection Short-circuit to ground
Power-on state
7
0 V
AO accuracy
Measurement Conditions Percent of Reading (Gain
Error)
Percent of Range (Offset
Error)
8
Typical (25 °C, ±5 °C) 0.09% 0.02%
Maximum (-40 to 85 °C) 0.50% 0.20%
Gain drift 23 ppm of reading/°C
Offset drift 5.4 ppm of range/°C
INL ±194 ppm of range, maximum
DNL ±16 ppm of range, maximum
Capacitive drive 1.5 nF, typical
Slew rate 3.7 V / μsec, typical
Settling time (100 pF load to 320 μV)
FS step 50 μs
2 V step 12 μs
0.2 V step 9 μs
6
This is the maximum update rate when running one AO channel in a loop with the FPGA top-level
clock set to 40 MHz.
7
When the analog output initializes, a voltage glitch occurs for about 20 μs, peaking at 1.3 V,
typical.
8
Range is 5 V.
NI sbRIO-9627 Specifications
|
© National Instruments
|
9