National Instruments NI PXIe-4138, Getting Started Manual

Page: 8 / 10

Troubleshooting
If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit
ni.com/support .
What Should I Do if the NI 4138/4139 Doesn't Appear
in MAX?
1. In the MAX configuration tree, expand Devices and Interfaces .
2. Expand the Chassis tree to see the list of installed devices, and press <F5> to refresh the
list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4. Navigate to the Device Manager.
Operating System Description
Windows 8 Right-click the Start screen, and select All apps » Control Panel »
Hardware and Sound » Device Manager .
Windows 7 Select Start » Control Panel » Device Manager .
Windows Vista Select Start » Control Panel » System and Maintenance » Device
Manager .
Windows XP Select Start » Control Panel » System » Hardware » Device
Manager .
5. If you are using a PXI or PXI Express controller, verify that a National Instruments
entry appears in the system device list. Reinstall NI-DCPower and the device if error
conditions appear in the list. If you are using an MXI controller, right-click
PCI-to-PCI
Bridge , and select Properties from the shortcut menu to verify that the bridge is enabled.
Why Is the ACCESS LED Off When the Chassis Is
On?
The LEDs may not illuminate until the device has been configured in MAX. Before
proceeding, verify that the NI 4138/4139 appears in MAX.
If the ACCESS LED fails to illuminate after you power on the PXI Express chassis, a problem
may exist with the PXI Express power rails, a hardware module, or the LED.
1.
Caution Apply external signals only while the NI 4138/4139 is powered on.
Applying external signals while the device is powered off may cause damage.
Disconnect any signals from the PXI Express module front panels.
2. Remove any front panel connections from the NI 4138/4139.
3. Power off the PXI Express chassis.
4. Remove the module from the PXI Express chassis and inspect it for damage. Do not
reinstall a damaged device.
8 | ni.com | NI PXIe-4138/4139 Getting Started Guide