Use Your NI PXIe-4304/4305 Module in an Application
For NI software version compatibility, refer to the
NI-DAQmx Readme
, available from
Start»
All Programs»National Instruments»NI-DAQmx
.
To get started with data acquisition in your application software, refer to the tutorials listed in
Table 1.
Programming Examples
NI-DAQmx includes example programs to help you get started developing an application.
LabVIEW and CVI examples are located at
Help»Find Examples
in your application software.
Text-based code examples are located at
All Programs»National Instruments»NI-DAQmx»
Text-Based Code Support
. Modify example code and save it in an application, or use examples
to develop a new application or add example code to an existing application.
For other examples, go to
and enter the Info Code
daqmxexp
.
Terminal Block Removal
To remove the terminal block, refer to Figure 7 while completing the following steps:
Note
The chassis can be powered on or off when removing the terminal block.
1.
Loosen the terminal block mounting screw located at the top of the terminal block.
2.
To remove the terminal block:
a.
Raise the latch release using a flathead screwdriver to disengage the latch.
Table 1.
DAQ Assistant Tutorial Locations
Application
Tutorial Location
LabVIEW
and search for
Taking an NI-DAQmx
Measurement in LabVIEW
.
LabWindows/CVI
Go to
Help»Contents
. Next, go to
Using LabWindows/CVI»
Data Acquisition»Taking an NI-DAQmx Measurement in
LabWindows/CVI
.
Measurement Studio
Go to
NI Measurement Studio Help»Getting Started with the
Measurement Studio Class Libraries»Measurement Studio
Walkthroughs»Walkthrough: Creating a Measurement Studio
NI-DAQmx Application
.
NI SignalExpress
*
Go to
Help»Taking an NI-DAQmx Measurement in
SignalExpress
.
*
NI SignalExpress, an easy-to-use configuration-based tool for data logging applications, is at
Start»All
Programs»National Instruments»NI SignalExpress
.
Datasheet
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com