©
National Instruments Corporation
3
NI PXI-8104 Installation Guide
11. Connect the DVI monitor video cable to the DVI connector. If you are
using a VGA monitor, use the DVI-to-VGA adapter included with
your kit.
12. Connect peripherals to ports as required by your system configuration.
13. Power on the display. Refer to the
NI PXI-8104 User Manual
for
details.
14. Power on the chassis.
15. Verify that the controller boots. If it does not boot, refer to the
the NI PXI-8104 Does Not Boot?
section later in this guide.
Figure 2 shows an NI PXI-8104 controller installed in the system controller
slot of a National Instruments PXI-1042 chassis. You can place PXI devices
in any other slot.
Figure 2.
NI PXI-8104 Controller Installed in a PXI Chassis
1
NI PXI-1042 Chassis 2
NI PXI-8104 Controller
3
Injector/Ejector Rail
1
2
3
Summary of Contents for NI PXI-8104
Page 1: ...PXI 1042...
