3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the PCIe-7821R kit.
Figure 1. PCIe-7821R Kit Contents
3
2
1
1. Hardware
2. NI-RIO Media
3. Getting Started Guide
Installing Software on the Host Computer
Before using the PCIe-7821R, you must install the following application software and device
drivers on the host computer.
1.
LabVIEW 2017 or later
2.
LabVIEW FPGA Module 2017 or later
3.
NI R Series Multifunction RIO Device Drivers May 2017 or later
Visit
ni.com/info
and enter the Info Code
softwareversion
for minimum software support
information.
Installing the PCIe-7821R
1.
Power off and unplug the computer.
2.
Access the computer system expansion slots. This step might require you to remove one
or more access panels on the computer case.
3.
Locate a compatible slot and remove the corresponding slot cover on the computer back
panel.
4.
Touch any metal part of the computer to discharge any static electricity.
5.
Insert the PCIe-7821R into the applicable PCI Express system slot. Gently rock the
PCIe-7821R into place. Do not force the device into place.
NI PCIe-7821R Getting Started Guide
|
© National Instruments
|
3
