National Instruments NI PCI-GPIB Installation Manual Download Page 16

© 

National Instruments Corporation

15

Installing Your GPIB Hardware and NI-488.2 for Solaris

Will my NI PCI-GPIB, NI PXI-GPIB, or NI PMC-GPIB work in a 64-bit 
slot?

Yes. The current versions of all three boards will work in 32 or 64-bit slots, as well 
as 3.3V or 5Vslots.

Technical Support and Professional Services

Visit the following sections of the award-winning National Instruments Web site 
at 

ni.com 

for technical support and professional services:

Support

—Technical support at 

ni.com/support

 includes the following 

resources:

Self-Help Technical Resources

—For answers and solutions, visit 

ni.com/support

 for software drivers and updates, a searchable 

KnowledgeBase, product manuals, step-by-step troubleshooting wizards, 
thousands of example programs, tutorials, application notes, instrument 
drivers, and so on. Registered users also receive access to the 
NI Discussion Forums at 

ni.com/forums

. NI Applications Engineers 

make sure every question submitted online receives an answer.

Standard Service Program Membership

—This program entitles 

members to direct access to NI Applications Engineers via phone and 
email for one-to-one technical support as well as exclusive access to on 
demand training modules via the Services Resource Center. NI offers 
complementary membership for a full year after purchase, after which you 
may renew to continue your benefits. 

For information about other technical support options in your area, visit 

ni.com/services

, or contact your local office at 

ni.com/contact

Summary of Contents for NI PCI-GPIB


















Reviews: