NI Digital Waveform Generator/Analyzer Guide
4
ni.com
•
1/8 in. flathead screwdriver
•
Number 1 Phillips screwdriver
•
Microsoft Internet Explorer 5.5 or later
•
Measurement & Automation Explorer (MAX) 3.1 or later
•
A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
•
The appropriate cable for your device, as shown in the following table:
•
NI EMC Filler Panel Kit, available from NI (part number 778700-01)
Recommended System
The recommended system requirements include the following components
and tools:
•
Pentium III/Celeron 600 MHz or equivalent processor
•
256 MB RAM
•
A PXI chassis and controller or desktop computer
•
1/8 in. flathead screwdriver
•
Number 1 Phillips screwdriver
•
Microsoft Internet Explorer 5.5 or later
•
Measurement & Automation Explorer (MAX) 3.1 or later
•
A screen resolution of 800 × 600 with 256 colors (required for the
NI Script Editor)
•
The appropriate cable for your device, listed in Table 1.
•
A compatible connectivity accessory for your NI digital waveform
generator/analyzer, listed in the following table:
Table 1.
NI Digital Waveform Generator/Analyzer Cables
Device
Cable
Cable Part Number
NI 654
X
NI SHC68-C68-D2
188142-01
NI 655
X
NI SHC68-C68-D2
188142-01
NI 656
X
NI SHB12X-B12X
192344-01
Table 2.
NI Digital Waveform Generator/Analyzer Accessories
Accessory
Supported Devices
NI CB-2162
NI 654X, NI 655
X
NI SMB-2163
NI 654X, NI 655
X
