MID-7604/7602 Stepper Power Motor Drive User Guide
18
ni.com
Figure 14.
Analog Output Terminal Block Pin Assignment
Accessories for Optional Use
Strain-Relief Bar
The strain-relief bar provides strain relief for wiring to the back panel terminals of the MID-7604/7602.
The arms of the strain-relief bar attach to the sides of the MID-7604/7602 with the thumb nuts facing
upward, as shown in Figure 15.
Using the provided screws, attach the strain-relief bar to the rear set of screwholes on the side panels of
the MID-7604/7602.
Figure 15.
MID-7604/7602 with the Strain-Relief Bar Installed
1
2
3
4
5
Analog Output 1
Analog Output 2
Analog Output 4
Analog Output 3
Analog Output Ground
S
tr
a
in-Relief B
a
r