National Instruments NI ISC-1772C, User Manual

Page: 70 / 87

© National Instruments Corporation B-1 NI 177x Smart Camera User Manual
B
Camera Attributes
The following table provides a partial list of the available NI 177x Smart
Camera attributes for use in LabVIEW applications.
Table B-1. Camera Attributes
Attribute Name Data Type Range Unit Description
AcquisitionFrameRate DBL
—
— Specifies the maximum frame rate
in fixed frame mode. Range
depends on the sensor.
AcquisitionFrameRateLimit DBL
—
— Indicates the maximum frame rate
in the current configuration.
Range depends on the sensor.
AutoWhiteBalance Command — Initiates an auto white balance.
NI 177xC Smart Cameras only.
BalanceRatio DBL 0.000 to 3.999 — Specifies the balance ratio of the
selected component. NI 177xC
Smart Cameras only.
BalanceRatioSelector Enum Red, Green, Blue — Specifies the balance ration to
control. NI 177xC Smart Cameras
only.
BlackLevelRaw U32 0 to 255 — Specifies the camera black level.
Coding Enum Raw, Mono,
BGRAPacked — Controls the pixel coding in the
image.
Raw
outputs the data in the
native format of the sensor. Color
pixel formats are only available
for NI 177xC Smart Cameras.
CounterEventSource Enum Input 0, Input 1,
Input 2, Input 3 — Indicates the source for the
selected counter. Each counter
maps to the input line with the
same index.
CounterEventActivation Enum Rising Edge,
Falling Edge — Gets or sets the activation for the
selected counter.
CounterReset Command — — Resets the selected counter.