Getting Started with the NI EVS-1464RT
10
ni.com
Figure 4.
Connecting the NI EVS-1464RT to the Development Computer Through a Network
1.
Use an Ethernet cable to connect the Ethernet hub to the primary network connector on the
NI EVS-1464RT, as show in Figure 3.
2.
Power on the NI EVS-1464RT.
Note
You must connect the NI EVS-1464RT to the network before the NI EVS-1464RT boots. The
NI EVS-1464RT does not have an on or off switch, and boots when power is supplied to it.
The NI EVS-1464RT is now connected to the development computer through a network.
Configuring the NI EVS-1464RT for Deployment
The following sections describe how to use the application development environment installed on the
development computer to configure the NI EVS-1464RT. The configuration instructions differ for each
application development environment. Complete
only
the instructions for your chosen development
environment.
1
Connecting to the Primary Ethernet Port on the NI EVS-1464RT
2
Connecting to an Ethernet Port on the Development Computer
3
Ethernet Hub or Other Network Port
DIGI
TAL
I/O
!
IEEE 1
3
94
b
IEEE
1
3
94
b
CAM
I
S
O
1
2
3
