National Instruments NI ENET-9000 Series, Getting Started Manual, Page: 6 / 16

NI-DAQmx for NI WLS/ENET-9163 Getting Started Guide 6 ni.com
If you plugged your device into an Ethernet port on your local subnet or
directly into your computer, the device should appear in the list of available
devices.
3. Put a checkmark next to your device in the Available Devices window and
click Add Selected Devices to add the device to MAX. The device will be
listed under Network Devices in the configuration tree.
If your device does not appear in Available Devices, wait until the POWER LED
on the device is green and the STATUS LED turns off, then click
Refresh List .
If the device does not appear, try the following:
• If you connected your device directly to your computer, ensure your network
card is configured to obtain an IP address automatically, then click
Refresh
List .