background image

Chapter 2

Hardware and Software Installation

NI CardBus-8310-to-PXI Expansion User Manual

2-8

ni.com

7.

The Found New Hardware Wizard dialog box will appear again, and 
will find another PCI to PCI bridge, because there are two bridge chips. 
Follow the instructions outlined in steps 4 through 7 to successfully 
install the second PCI to PCI bridge.

8.

The Found New Hardware Wizard will now detect the PXI modules 
that have been installed in the PXI chassis. Follow the same procedure 
described in steps 4 through 7 to successfully install each module.

Note

Remember that PXI devices in the chassis will not be recognized unless the 

device-specific driver has been installed. The devices will show up as generic PCI devices 
and will not operate properly.

Verifying the Installation

Go to 

Start»Control Panel»Printers and Other Hardware»System»

Hardware»Device Manager

 and make sure 

View device by connection

 

is selected. From there, go to 

ACPI»Microsoft ACPI-Compliant 

System»PCI Bus

. Open the device branches until you reach the CardBus 

bridge. Under this entry you should see any hardware that is installed in the 
PXI chassis. In Figure 2-7, a PXI-GPIB card has been installed in a 
PXI chassis.

Summary of Contents for NI CardBus-8310-to-PXI Expansion












































Reviews: