NI 9925 Installation Guide
2
ni.com
For more information about IP ratings, refer to the
Understanding IP Ratings
section. For
NI cDAQ-9181/9191 chassis specifications, refer to the
NI cDAQ-918x/919x User Manual
,
available from
ni.com/manuals
.
Figure 2 shows the NI 9925 dimensions.
Figure 2.
NI 9925 Dimensions and Mounting Hole Locations
Setting Up and Installing the NI 9925
You need a number 2 Phillips screwdriver and a 0.125 in. flathead screwdriver to install the
NI 9925. Complete the following steps to set up and install the NI 9925.
1.
Remove the NI 9925 from the package and inspect it and the kit contents. Contact NI if the
enclosure appears damaged. Do
not
install a damaged enclosure or use kit contents that
appear damaged.
2.
Use a number 2 Phillips screwdriver to loosen the captive screws and remove the enclosure
cover.
3.
(Optional) Mount the NI 9925. Refer to Figure 2 for the NI 9925 mounting hole
dimensions.
4.
If you are using an NI cDAQ-9191, remove the antenna from the chassis.
8
1.5 mm
(
3
.21 in.)
21.0 mm
(0.
83
in.)
160.0 mm
(6.
3
0 in.)
109.0 mm
(4.29 in.)
Mo
u
nting
Hole
s
3
40.0 mm
(1
3
.
3
9 in.)
Mo
u
nting Hole
s
91.0 mm
(
3
.5
8
in.)
3
60.0 mm
(14.17 in.)
4x Ø6.5 mm
(0.26 in.)
61.
8
mm
(2.4
3
in.)