©
National Instruments Corp.
5
NI 9861 Operating Instructions
SHLD, that you can connect to a shielded CAN cable. Connecting
SHLD may improve signal integrity and EMC performance in a
noisy environment.
Caution
You must use a UL listed ITE power supply
marked LPS with the NI 9861.
The NI 9861 requires an external power supply of +9 to +30 V to
operate. Supply power to the NI 9861 V
SUP
pin from the CAN bus.
Note
Power on V
SUP
is required for CAN operation.