background image

© 2011 National Instruments Corp. All rights reserved.

373420A-01

Aug11

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are 
trademarks of National Instruments Corporation. Refer to the 

Trademark Information 

at 

ni.com/trademarks

 

for other National Instruments trademarks. Other product and company names mentioned herein are trademarks or 
trade names of their respective companies. For patents covering National Instruments products/technology, refer 
to the appropriate location: 

Help»Patents

 in your software, the 

patents.txt

 file on your media, or the 

National Instruments Patent Notice

 at 

ni.com/patents

. Refer to the 

Export Compliance Information 

at 

ni.com/legal/export-compliance

 for the National Instruments global trade compliance policy and 

how to obtain relevant HTS codes, ECCNs, and other import/export data.

National Instruments corporate headquarters is located at 
11500 North Mopac Expressway, Austin, Texas, 78759-3504. 
National Instruments also has offices located around the world to 
help address your support needs. For telephone support in the 
United States, create your service request at 

ni.com/support

 

and follow the calling instructions or dial 512 795 8248. For 
telephone support outside the United States, visit the Worldwide 
Offices section of 

ni.com/niglobal

 to access the branch office 

Web sites, which provide up-to-date contact information, support 
phone numbers, email addresses, and current events.

Summary of Contents for NI 9795 WSN C Series


















Reviews: