If the power supply you are using with the NI 9475 cannot supply
more than 13 A, the module may be damaged if a short-circuit
condition occurs.
Resetting Channels after an Overcurrent
Condition
After you have determined and fixed the cause of an overcurrent
condition, reset the channel by turning it off.
Alternatively, you can disconnect the external power supply from
the module. However, doing so disconnects power from all the
module channels.
Normal operation can resume after you correct the overcurrent
condition and reset the channel.
NI 9475 Getting Started Guide
|
© National Instruments
|
17
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com