![background image](http://html1.mh-extra.com/html/national-instruments/ni-781-r-series/ni-781-r-series_user-manual_3585008033.webp)
Chapter 2
Hardware Overview of the NI 78xxR
©
National Instruments Corporation
2-11
R Series Intelligent DAQ User Manual
Differential Connections for Ground-Referenced
Signal Sources
Figure 2-6 shows how to connect a ground-referenced signal source to a
channel on the NI 783
x
R/784
x
R/785
x
R configured in DIFF input mode.
Figure 2-6.
Differential Input Connections for Ground-Referenced Signals
With this connection type, the instrumentation amplifier rejects both the
common-mode noise in the signal and the ground potential difference
between the signal source and the NI 783
x
R/784
x
R/785
x
R ground, shown
as V
cm
in Figure 2-6. In addition, the instrumentation amplifier can reject
common-mode noise pickup in the leads connecting the signal sources to
the device. The instrumentation amplifier can reject common-mode signals
when V+
in
and V–
in
(input signals) are both within their specified input
ranges. Refer to the
NI R Series Intelligent DAQ Specifications
, available at
ni.com/manuals
, for more information about input ranges.
DIFF Input Mode Selected
–
+
–
+
–
+
–
+
V
cm
V
s
I/O Connector
AISENSE
AIGND
V
m
AI+
AI–
Ground-
Referenced
Signal
Source
Common-
Mode
Noise and
Ground
Potential
Measured
Voltage
Instrumentation
Amplifier
Summary of Contents for NI 781 R Series
Page 1: ...PXI 7842...