©
National Instruments Corporation
5
NI 6583R User Guide and Specifications
Note
If you design a custom cabling solution with the DDC B differential connector (779157-01)
and NI SHB12X-B12X cable (192344-01), the NI 6583 pinout is reversed at the end connector.
For example, the signal shown on pin 1 shown in Figure 3 maps to pin 73 at the end connector.
Pin and Signal Tables
Table 2 contains pin location and single-ended signal information for DDC A on the NI 6583.
Table 2.
NI 6583 DDC A Connector Pins
Signal Name
Pin(s)
Signal Type
Signal Description
DDC CLK OUT
33
Clock
Terminal for the single-ended exported Sample clock.
STROBE
67
Clock
External Sample clock source that can be used for source
synchronous acquisition.
DIO <0..31>
1, 3, 5, 7, 9, 11, 13, 15,
17, 19, 21, 23, 25, 27,
29, 31, 35, 37, 39, 41,
43, 45, 47, 49, 51, 53,
55, 57, 59, 61, 63, 65
Data
Bidirectional single-ended digital I/O data channels
0 through 31.
PFI <1..3>
26, 30, 64
Control/Data
Bidirectional single-ended digital I/O trigger channels
1 through 3.
GND
2, 4, 6, 10, 12, 14, 16,
18, 20, 22, 24, 28, 32,
34, 36, 38, 40, 42, 44,
46, 48, 50, 54, 56, 58,
62, 66, 68
Ground
Ground reference for signals.
RESERVED
8, 52, 60
—
These terminals are reserved for future use. Do not connect
to these pins.
Summary of Contents for NI 6583R
Page 1: ...NI 6583...
