NI 6583R User Guide and Specifications
20
ni.com
17. Select
NI 6583 Voltage Level
. Click
OK
to drag and place the file on your block diagram.
18. Right-click the Voltage Level control and select
Change to Control
.
19. Wire the Voltage Level control to the
IO Module\Voltage_Family
node, as shown in Figure 14.
20. Add a case structure around the
IO Module\SE_Data_Dir
,
IO Module\SE_Data_Rd
,
and
IO Module\SE_Data_Wr
nodes driven by
IO Module\Set_Voltage_Done
to prevent input
and output access while the voltage is changing.
Your block diagram should now resemble the block diagram in Figure 14.
Figure 14.
Static RW with Voltage (FPGA).vi Block Diagram
21. Save the VI as
Static RW with Voltage (FPGA).vi
.
22. Close the VI.
23. In the Project Explorer window under
My Computer
, expand the tree view for your device,
right-click the
Static RW with Voltage (FPGA).vi
and select
Compile
to compile the files for
your target.
The
Generating Intermediate Files
window opens and displays the compilation progress.
The
LabVIEW FPGA Compile Server
window opens and runs. The compilation takes several
minutes.
24. When the compilation finishes, click the
Stop Server
button.
25. Click
OK
in the
Successful Compile Report
window. Close the VI without saving changes.
Summary of Contents for NI 6583R
Page 1: ...NI 6583...
