National Instruments NAT7210, Reference Manual

Page: 6 / 8

GPIB ASIC Reference Manual Errata 6 ni.com
• Page F-2, the last line of the Multiline Interface Command Messages
section, add to the existing text,
1F 037 31 US
by inserting this new text,
CFE in the Msg column
• Page F-2, under Message Definitions , add these two new messages to
the existing text,
• Page F-3, the table on the right-hand side of the page, which begins
with a Hex value of 60, insert the data in bold-face type as shown in
Table 1.
Table 1. New data in bold for Table on Page F-3, Right-Hand Side
CFE Configure Enable
CFG Configure
Hex Oct Dec ASCII Msg
60 140 96 ` MSA0,PPE
61 141 97 a MSA1,PPE ,CFG1
62 142 98 b MSA2,PPE ,CFG2
63 143 99 c MSA3,PPE ,CFG3
64 144 100 d MSA4,PPE ,CFG4
65 145 101 e MSA5,PPE ,CFG5
66 146 102 f MSA6,PPE ,CFG6
67 147 103 g MSA7,PPE ,CFG7
68 150 104 h MSA8,PPE ,CFG8
69 151 105 i MSA9,PPE ,CFG9
6A 152 106 j MSA10,PPE ,CFG10
6B 153 107 k MSA11,PPE ,CFG11
6C 154 108 l MSA12,PPE ,CFG12
6D 155 109 m MSA13,PPE ,CFG13
6E 156 110 n MSA14,PPE ,CFG14
6F 157 111 o MSA15,PPE ,CFG15