![background image](http://html2.mh-extra.com/html/national-instruments/mydaq/mydaq_user-manual_3404952032.webp)
32
|
ni.com
|
NI myDAQ User Guide
15. On the
Configuration
tab of the DAQ Assistant front panel window, configure voltage
channel 0 by selecting
VoltageOut_0
in the
Channel Settings
pane, and setting
Max
to
2
and
Min
to
-2
in the
Signal Output Range
pane. Repeat this step for voltage channel 1 if
you configured the task for two channels.
16. Under
Timing Settings
, set
Generation Mode
to
Continuous Samples
.
17. Click
OK
to exit the DAQ Assistant configuration front panel. The VI builds. Click
No
on
the Confirm Auto Loop Creation dialog box that displays.
18. Wire the
data
output terminal of the first DAQ Assistant Express VI to the
data
input
terminal of the second DAQ Assistant Express VI.
19. Add a While Loop to the block diagram by right-clicking the block diagram window and
selecting
Programming»Structures»While Loop
from the
Functions
palette, and drag
out a rectangular region to enclose both DAQ Assistant Express VIs.