manualshive.com logo in svg

National Instruments MXI Series, Getting Started, Page: 62 / 123

Share
Download
National Instruments MXI Series Getting Started Download Page 62

Chapter 

5  NI-VXI/NI-VISA 

Software 

Installation

PCI-MXI-2 for Linux

5-2

ni.com

Removing the NI-VXI Driver for Linux

To uninstall the driver, you must meet the following requirements:

•

You must have superuser privileges.

•

The driver must not be in use.

To remove the NI-VXI/NI-VISA software, use the uninstall script on the 
CD-ROM. Follow these steps to uninstall the software:

1.

Follow steps 1–4 in the 

Installing the NI-VXI/NI-VISA Software for 

Linux

 section.

2.

To run the uninstallation script, type the following command:

./UNINSTALL

Using the NI-VXI/NI-VISA Software

The NI-VXI software is configured to be loaded in the 

/usr/local/nivxi

 directory.

The NI-VISA software is configured to be loaded in the 

/usr/local/vxipnp

 directory.

Completing the Software Installation

After the software is installed, run 

resman

, the National Instruments 

Resource Manager. You must run 

resman

 every time the computer or 

chassis power is cycled so that your application can access devices in the 
VXI/VME chassis.

After you run 

resman

, you are ready to use the NI-VXI Resource Editor 

program 

vxiedit

 to interactively configure the hardware in your system. 

Refer to Chapter 6, 

NI-VXI Configuration Utility

, for instructions on using 

the configuration editors in 

vxiedit

.

Summary of Contents for MXI Series




























































































































Reviews:

No comments