Chapter 2
Measurement Studio .NET Class Libraries
©
National Instruments Corporation
2-7
Measurement Studio User Manual
Figure 2-1.
Waveform Graph with Cursors and Scatter Graph with XY Point
Annotation; Both Graphs Have Corresponding Legends
With the waveform graph and scatter graph controls and the classes that
interface with the controls, you can perform the following operations:
•
Plot and chart data.
•
Configure a graph to contain multiple plots to show separate but
related data on the same graph.
•
Configure a graph to include multiple axes or independent ranges so
that plot data fits the graph plot area.
•
Draw lines or fills from a plot to an X value, Y value, or plot.
•
Specify plots in the scatter graph control as X and Y data. Specify plots
in the waveform graph control as X or Y data and optionally with date
and time scaling.
•
Specify anti-aliased plots for plot lines.
•
Use plot data tooltips to display X and Y coordinates when a user
hovers the mouse over a data point.
•
Use cursors to identify key points in plots and the plot area.
•
Configure cursor snap modes to be fixed, floating, nearest point,
and to plot.
