manualshive.com logo in svg

National Instruments Isolated Current Output Module SCC-CO20, User Manual, Page: 10 / 15

Share
Download
National Instruments Isolated Current Output Module SCC-CO20 User Manual Download Page 10

SCC-CO20 Isolated Current Output Module User Guide

10

ni.com

Specifications

These ratings are typical at 25

°

C unless otherwise stated.

Electrical

Number of output channels.....................1

Output referencing ..................................Nonreferenced (floating)

Input range ..............................................0 to 10 V

Output range ...........................................0 to 20 mA

Voltage compliance ................................12.5 V

Maximum load resistance

5 mA ................................................2,500

Ω

10 mA ..............................................1,250 

Ω

15 mA ..............................................830 

Ω

20 mA ..............................................625 

Ω

Absolute accuracy...................................0.1% of full-scale output range

Temperature drift ....................................0.5

μ

A/

°

C typ

1

μ

A/

°

C max

Power Requirement

Analog power .........................................175 mW max

+

15 V ...............................................5.8 mA max

–15 V ...............................................5.8 mA max

Digital power (

+

5 V) ..............................645 mW

+

5 V .................................................129 mA max

Summary of Contents for Isolated Current Output Module SCC-CO20
















Reviews:

No comments