SCC-AI Series Isolated Analog Input Modules
10
ni.com
Table 1-2 shows suggested values for some of the parameters. Use default
values for parameters not shown.
9.
Click
Test
to test the channel. You should be able to view your
measurement in the window that appears.
You have finished configuring the NI-DAQmx task or global channel.
Creating a Virtual Channel in Traditional NI-DAQ
To create a Traditional NI-DAQ virtual channel, complete the following
steps.
1.
Open
Measurement & Automation
Explorer.
2.
Right-click
Data Neighborhood
and select
Create New
.
3.
Select
Traditional NI-DAQ Virtual Channel
and click
Finish
.
4.
Click
Next
to select
Analog Input
as the type of channel to configure.
5.
Select
Voltage
from the drop-down list and click
Next
.
6.
Enter the rest of the values as they apply to your setup and click
Next
.
7.
On the next screen, specify information about the E Series DAQ device
being used and click
Finish
.
8.
To test the channel, click
Test
.
You have finished configuring the Traditional NI-DAQ virtual channel.
Table 1-2.
SCC-AI
XX
Suggested Values
Module
Input Range
SCC-AI01
±42 V
SCC-AI02
±20 V
SCC-AI03
±10 V
SCC-AI04
±5 V
SCC-AI05
±1 V
SCC-AI06
±100 mV
SCC-AI07
±50 mV
SCC-AI13
±10 V
SCC-AI14
±5 V