National Instruments ISO5851, User Manual

Page: 11 / 16

www.ti.com
Printed-Circuit Board
4.2 ISO5851 EVM Bill of Materials
The ISO5851 EVM bill of materials is shown in Table 2 .
Table 2. Bill of Materials
Item QTY Reference Part Manufacturer Manufacturer Part Number
1 1 C1 DNI DNI DNI
2 1 C2 1 µF AVX Corporation TPSA105K020R3000
3 1 C3 0.1 µF Kemet Electronic Components C0805C104J5RACTU
4 2 C4,C5 220 pF Vankel C0805COG101-221JNE
5 2 C6,C9 22 µF AVX Corporation TAJV226K050RNJ
6 2 C7,C10 4.7 µF Kemet Electronic Components C1210X475K5RACTU
7 4 C8,C11,C14,C15 1 µF Murata Electronics North America GRM21BR71H105KA12L
8 1 C12 1 nF Murata Electronics North America GRM2195C2A102JA01D
9 1 C13 220 pF Venkel C0805COG101-221JNE
10 1 D1 UF4007 Fairchild Semiconductor UF4007
11 1 D2 BAT165 Infineon Technologies BAT 165 E6327
12 1 D3 MURS160T3G ON Semiconductor MURS160T3G
13 1 D4 BAT165 Infineon Technologies BAT 165 E6327
16 1 JMP1 Header 5x2 Samtec Inc HTSW-105-07-G-D
17 2 JMP2,JMP5 HDR_THVT_1x2 Samtec Inc HTSW-102-07-G-S
18 2 JMP3,JMP4 Header 3x1 Samtec Inc HTSW-103-07-G-S
19 1 P1 GND2 Emerson Network Power 108-0740-001
20 1 P2 COLLECTOR (50-V DC MAX) Emerson Network Power 108-0740-001
21 2 Q1, Q2 IGBT DNI DNI
22 2 R1,R2 10 k Ω Vishay Dale CRCW080510K0FKEA-
23 2 R3, R12 10 Vishay Dale CRCW120610R0FKEA
23b 1 R4 DNI DNI DNI
24 1 R5 10 Vishay/Dale CRCW120610R0FKEA
25 3 R6,R8,R9 0 Vishay Dale CRCW12060000Z0EA-
26 1 R7 1 k Ω Panasonic - ECG ERJ-8ENF1001V
27 1 R10 9 k
Ω
Yageo RC1206FR-079K09L
28 1 R11 1 k Ω Panasonic - ECG ERJ-8ENF1001V
29 1 TB2 3PIN_TERMINAL_BLOCK TE Connectivity 282834-3
30 1 TB3 2PIN_TERMINAL_BLOCK TE Connectivity 282834-2
32 1 U1 16 PIN DEVICE Texas Instruments ISO5851DW
33 20 TP1 through TP20 Color: Red for Power, Black for Ground
and Blue for Signal
34 4 Standoff/spacers 1 inch
Note: C6, C7, C8, C9, C10, C11, C12, C13, C14, and C15 are rated for > 50-V
Jumpers (default):
a. Pins 1 and 2 of JMP2 are connected with a jumper.
b. Pins 1 and 2 of JMP5 are connected with a jumper.
c. No jumper on any pins of JMP3 & JMP4.
d. Pin 3 and 4 of JMP1 are connected with a jumper and rest pins of JMP1 are kept open
11 SLLU218 – June 2015 ISO5851 Evaluation Module
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated