background image

Connector Pinouts

The ISC-178x provides the following connectors.

Power and I/O Connector

The Power and I/O connector is a 12-pin female M12 connector that provides power to the

camera and transmits digital I/O signals.
In addition, the connector has a specialized analog dimmer output intended to be used with

Advanced Illumination lighting devices.

Related Information

Connecting to Lighting Devices

 on page 12

Wiring the Isolated Inputs

 on page 13

Wiring the Isolated Outputs

 on page 14

ISC-178x Power and I/O Connector Pinout

1

2

3

4

5

6

7

8

9

10

11

12

Table 1.

 ISC-178x Power and I/O Connector Signal Descriptions

Pin

Signal

Description

 

 

 

1

C OUT

Common reference (negative) for isolated outputs

2

Analog Out Analog reference output for lighting controller

3

Iso Out 2+ General-purpose isolated output (positive)

4

V

System power voltage (24 VDC ± 10%)

5

Iso In 0

General-purpose isolated input

6

C IN

Common reference (positive or negative) for isolated inputs

7

Iso In 2

General-purpose isolated input

8

Iso In 3

(NI Linux Real-Time)

 Reserved for safe mode

(Windows)

 General-purpose isolated input

9

Iso In 1

General-purpose isolated input

ISC-178x User Manual

  | 

© National Instruments

  | 

3

Summary of Contents for ISC-1780










































Reviews: