6-6
|
ni.com
Chapter 6
LEDs and DIP Switches
CONSOLE Switch
With a serial port terminal program, you can use the CONSOLE switch to read device
information from the NI Smart Camera during startup, such as the IP address and firmware
version. When the CONSOLE switch is in the ON position, the serial port outputs device
information and is not available for applications. The smart camera reads this switch only when
powering up or restarting and will only display device information during startup.
When the CONSOLE switch is in the OFF position, you can use the smart camera serial port and
NI-Serial driver software to send and receive serial data. The NI-Serial software is installed
when you install NI-IMAQ. When using the NI-Serial driver, keep the CONSOLE switch in the
OFF position during normal operation.
Refer to the
, for more
information about using serial communication with the smart camera.
S
AFE MODE
IP RE
S
ET
NO APP
CON
S
OLE
ON
Summary of Contents for ISC-1762
Page 1: ...ISC 1762...
