2
What You Need to Get Started
To install your IMAQ A2514 cable, you will need the following:
❑
IMAQ A2514 cable
❑
IMAQ A2514 Cable Installation Guide
❑
Your IMAQ device and documentation
❑
BNC cables
❑
Your computer
❑
Your camera or other video or trigger signal source
Installation
Insert the DSUB connector end of the IMAQ A2514 cable, shown in
Figure 1a, into the external 25-pin DSUB receptacle of your IMAQ
device, ensuring correct polarity. Tighten the thumbscrews as necessary.
You can now connect up to 13 BNC cables to the other end of the IMAQ
A2514 cable, as shown in Figure 1b, for access to four video channels,
four trigger channels, composite synchronization input and output,
horizontal synchronization input, vertical synchronization input, pixel
clock input, and chassis and digital ground.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
