Chapter 4
Nonvolatile Configuration
©
National Instruments Corporation
4-9
Code Instrument Block Base
This parameter specifies the local GPIB-VXI/C address base for Static
Code Instruments.
Note
National Instruments no longer supports development of Code Instruments.
Code Instrument Number of RAM Blocks
This parameter specifies the number of 4-KB RAM blocks allocated from
the block base for use by Static Code Instruments.
Resident Code Instrument Locations
These parameters specify the base addresses of EPROMed Code
Instruments. These Code Instruments are automatically started up after
the Resource Manager operations complete.
Code Instrument Nonvolatile User Configuration
Variables
These parameters are completely user-defined and can be used for any
purpose.
Change Configuration Information
The item
Change Configuration Information
displays the
GPIB-VXI/C Nonvolatile Configuration Changer as shown.
GPIB-VXI Nonvolatile Configuration Changer
(C) 1995 National Instruments
==================================================
0). Edit Local Register Configuration
1). Edit pSOS Configuration
2). Edit VXI Interrupt Handler Logical Address
3). Edit Resource Manager Configuration
4). Edit Servant Area and DC Configuration
5). Edit FAILED Device Handling Mode
6). Edit GPIB Configuration
7). Edit Default CI Configuration
8). Edit Resident CI Base Locations
9). Edit CI User Configuration Variables
Q). Quit Editor
Choice (0-9,Q):
